Ceiling connector for wire-rope system

Ceiling connector for attaching the wire rope to the ceiling. A ceiling connector and a floor connector are required for each wire rope. If it is not possible to drill into the existing ceiling, the wire rope can of course also be fastened and tensioned by means of a corresponding suspension, e.g. by hooks. Here is an example of use for a presentation rope with 3 DIN A4 advertising frames:- 08 pcs. Article no.: NE-475W (makes 2x4 metres of tension wire) - 03 pcs. Item No.: NE-480WH (DIN A4 acrylic frame in portrait format) - 02 pcs. Item no.: NE-477W (Ceiling connector) - 02 pcs. Item No.: NE-476W (Floor Connector) - 12 pcs. Article No.: NE-478W (Side Connector)Here is an example of use for two adjacent presentation strings with 3 A4 advertising frames each, i.e. a total of 6 A4 frames (3 per string):- 12 pcs. Item no.: NE-475W (results in 3x4 metres of tension wire)- 06 pcs. Item no.: NE-480WH (DIN A4 acrylic frame in portrait format)- 03pcs. Item no.: NE-477W (Ceiling connector)- 03pcs. Article-No.: NE-476W (Floor-Connector)- 12pcs. Item No.: NE-478W (Side Connector)- 06pcs. Article no.: NE-479W (double connector)The ceiling connectors are attached to the ceiling and the floor connectors to the floor, e.g. by drilling. Then the side or double connectors are pulled onto the wire, which is then pushed into the self-locking ceiling and floor connectors. Now only the acrylic glass frames have to be attached to the wire by means of the side connectors and, if necessary, the double connectors. Done! Of course, the frames do NOT have to be removed again to replace your information material. Your advertising is conveniently and easily inserted into the advertising frame from above. If you need help with the configuration of your individual SYSTEM display, please contact the VITAdisplays^® customer service with the exact dimensions of your available presentation area. We will be happy to advise you!